ACCESS MULTI-SERVICE DIGITAL BACKHAUL AND FRONTHAUL SOLUTIONS FOR SMALL CELL BACKHAUL, WIFI OFFLOADING AND BTS HOTELING APPLICATIONS

- 16 Channels of Mixed Ethernet, LTE or WiFi - Reduces Sparing Costs Up To 95% - Lowers OPEX By 50-75% - Zero Jitter & Packet Loss - Ultra-Low Latency - Centralizes Provisioning - Commissioning in Hours, Not Days -Future Growth to 320GB/Strand

DMS DAS Managment

ACCESS OLT (OPTICAL LINE TERMINAL)
As the primary component of SOLiD's ACCESS™ fiber access solution, the OLT delivers 16 independent channels of Ethernet, LTE or WiFi traffic over a single strand of fiber.

FEATURES:

  • Chassis based 19", 3u
  • Resiliant optical channels - no impact if processor card, memory card or combiner cards are removed or fail
  • Channels remain in sync for 2.5 days if combiner card is removed or fails.
  • On board SNMP agent
  • Out of area services: delivers services up to 60km without the need for optical amplification or regeneration
  • Symmetric dedicated bandwidth and quality of service (QoS) for each protocol
  • Secure connections without port sharing
  • Tunable laser technology
  • No active electronics in the field
  • Hardware resilient with redundant power supplies

BENEFITS:

  • No provisioning required
  • Plug and play: No changes to plant required and no need for manual attenuation to vary distances
  • Inventory/ stock savings: No need to purchase optical modules per channel wavelength
  • Immune to large distance variation between destinations (-7db to -27db)
  • Immune to dirty connectors, reflection from splices, and temperature variations within operating temperature range
  • Seamless SFP interworking, including Copper based SFPs
  • Supports simple trouble-shooting and reporting

SYSTEM CAPACITY:

  • Up to 16 channel(λ) symmetric over a single core fiber

INTERFACE:

  • Gigabit Ethernet(GbE): IEEE 802.3z, IEEE 802.3ab (client side option)
  • Ethernet PON: E-PON, IEEE 802.3ah
  • SONET : OC3, OC12, OC48
  • CPRI
    • (x1) 614.14 Mbps, (x2) 1228.28 Mbps
    • (x4) 2457.6 Mbps, (x5) 3072.0 Mbps

OPTICAL CHARACTERISTICS:

  • Uplink: 16 channel, C-Band
  • Downlink: 16 channel, L-Band
  • 100GHz spacing ITU Grid DWDM
  • Dispersion tolerance: 1,700ps
  • Colorless, bi-directional
  • Transmission distance: up to 60km

HARDWARE:

  • 19-inch, 3U
  • Including Fan Module

POWER:

  • -48 DC, 1+1 load sharing

SAFETY STANDARDS AND REGULATORY COMPLIANCE:

  • UL/CSA 60950-1, FCC Part 15

PROTECTION:

  • Optical line protection (optional)

OAM&P:

  • In-band or out-band management
  • Alarm, Configuration, Statistics,

SNMP Agent

  • GUI based EMS

OPERATING TEMPERATURE:

  • -20 ~ +60C
OPTICAL NETWORK TERMINAL

ACCESS ONT (OPTICAL NETWORK TERMINAL)
The ACCESS ONT converts fiber-optic light signals from the OLT into signals for fiber and copper SFPs.

FEATURES:

  • Customer premise or tower side device
  • Tower device is capable of -40c to +85c
  • Terminates one wavelength channel (GbE or CPRI output)
  • Rich Superisory/monitoring data of ONT for WDM, GbE, CPRI statistics and alarms.
  • Capable of mapping external telemetary info
  • a Supports fiber and copper SFPs

SYSTEM CAPACITY:

  • Single channel symmetric

ONT INTERFACES

  • Gigabit Ethernet(GbE): IEEE 802.3z, IEEE 802.3ab (client side option)
  • Ethernet PON: E-PON, IEEE 802.3ah
  • Gigabit Capable PON: G-PON, ITU-T G.984
  • SONET: OC3, OC12, OC48
  • CPRI
    • (x1) 614.14 Mbps, (x2) 1228.28 Mbps
    • (x4) 2457.6 Mbps, (x5) 3072.0 Mbps

OPTICAL CHARACTERISTICS:

  • Uplink: one channel, L-Band
  • Downlink: one channel, C-Band
  • 100GHz spacing ITU Grid DWDM
  • Dispersion tolerance: 1,700ps
  • Colorless, bi-directional
  • Transmission distance: up to 60km

POWER:

  • 110/220V AC

SAFETY STANDARDS AND REGULATORY COMPLIANCE:

  • UL/CSA 60950-1, FCC Part 15

OPERATING TEMPERATURE:

  • -20 ~ +60C
  • Hardened -40 ~ +85C
MEDIA C-1600 PASSIVE SPLITTER ACCESS™ PASSIVE SPLITTER

Used primarily at a wavelength drop on the fiber line from the OLT

FEATURES:

  • No power required
  • Separates and combines 16 channels over one single fiber
  • Fiber closure type for outdoor use
  • Operating temp range -30c to +60c
  • Pole or vault mounting