ACCESS MULTI-SERVICE DIGITAL BACKHAUL AND FRONTHAUL SOLUTIONS FOR SMALL CELL BACKHAUL, WIFI OFFLOADING AND BTS HOTELING APPLICATIONS

ACCESS OLT (OPTICAL LINE TERMINAL)
As the primary component of SOLiD's INFINITY ACCESS™ fiber access solution, the OLT delivers 16 independent channels of Ethernet, LTE or WiFi traffic over a single strand of fiber.

FEATURES:

• Chassis based 19", 3u
• Resiliant optical channels - no impact if processor card, memory card or combiner cards are removed or fail
• Channels remain in sync for 2.5 days if combiner card is removed or fails.
• On board SNMP agent
• Out of area services: delivers services up to 60km without the need for optical amplification or regeneration
• Symmetric dedicated bandwidth and quality of service (QoS) for each protocol
• Secure connections without port sharing
• INFINITY Tunable Laser™ technology
• No active electronics in the field
• Hardware resilient with redundant power supplies

BENEFITS:

• No provisioning required
• Plug and play: No changes to plant required and no need for manual attenuation to vary distances
• Inventory/ stock savings: No need to purchase optical modules per channel wavelength
• Immune to large distance variation between destinations (-7db to -27db)
• Immune to dirty connectors, reflection from splices, and temperature variations within operating temperature range
• Seamless SFP interworking, including Copper based SFPs
• Supports simple trouble-shooting and reporting

SYSTEM CAPACITY:

• Up to 16 channel(λ) symmetric over a single core fiber

INTERFACE:

• Gigabit Ethernet(GbE): IEEE 802.3z, IEEE 802.3ab (client side option)
• Ethernet PON: E-PON, IEEE 802.3ah
• SONET : OC3, OC12, OC48
• CPRI
  • (x1) 614.14 Mbps, (x2) 1228.28 Mbps
  • (x4) 2457.6 Mbps, (x5) 3072.0 Mbps

OPTICAL CHARACTERISTICS:

• Uplink: 16 channel, C-Band
• Downlink: 16 channel, L-Band
• 100GHz spacing ITU Grid DWDM
• Dispersion tolerance: 1,700ps
• Colorless, bi-directional
• Transmission distance: up to 60km

HARDWARE:

• 19-inch, 3U
• Including Fan Module

POWER:

• -48 DC, 1+1 load sharing

SAFETY STANDARDS AND REGULATORY COMPLIANCE:

• UL/CSA 60950-1, FCC Part 15

PROTECTION:

• Optical line protection (optional)

OAM&P:

• In-band or out-band management
• Alarm, Configuration, Statistics,

SNMP Agent

• GUI based EMS

OPERATING TEMPERATURE:

• -20 ~ +60C

ACCESS ONT (OPTICAL NETWORK TERMINAL)
The ACCESS ONT converts fiber-optic light signals from the OLT into signals for fiber and copper SFPs.

FEATURES:

• Customer premise or tower side device
• Tower device is capable of -40c to +65c
• Terminates one wavelength channel (GbE or CPRI output)
• Rich Superisory/monitoring data of ONT for WDM, GbE, CPRI statistics and alarms.
• Capable of mapping external telemetary info
• a Supports fiber and copper SFPs

SYSTEM CAPACITY:

• Single channel symmetric

ONT INTERFACES

• Gigabit Ethernet(GbE): IEEE 802.3z, IEEE 802.3ab (client side option)
• Ethernet PON: E-PON, IEEE 802.3ah
• Gigabit Capable PON: G-PON, ITU-T G.984
• SONET: OC3, OC12, OC48
• CPRI
  • (x1) 614.14 Mbps, (x2) 1228.28 Mbps
  • (x4) 2457.6 Mbps, (x5) 3072.0 Mbps

OPTICAL CHARACTERISTICS:

• Uplink: one channel, L-Band
• Downlink: one channel, C-Band
• 100GHz spacing ITU Grid DWDM
• Dispersion tolerance: 1,700ps
• Colorless, bi-directional
• Transmission distance: up to 60km

POWER:

• 110/220V AC

SAFETY STANDARDS AND REGULATORY COMPLIANCE:

• UL/CSA 60950-1, FCC Part 15

OPERATING TEMPERATURE:

• -20 ~ +60C
• Hardened -40 ~ +65C

Used primarily at a wavelength drop on the fiber line from the OLT

FEATURES:

• No power required
• Separates and combines 16 channels over one single fiber
• Fiber closure type for outdoor use
• Operating temp range -40c to +85c
• Pole or vault mounting